|
| |
|
|
Verastile Sensor-based Experimental Platform
Tydor, Maximilián ; Ing. Vladimír Hubík, Ph.D. (Saab Czech s.r.o.) (referee) ; Šebesta, Jiří (advisor)
This document deals with issues of testing semiconductor inertial sensors like gyroscopes and accelerometers, but also other sensors like magnetometers, inclinometers and others for aviation navigation purposes where strict requirements cover every system. The goal of this thesis is to create modular test platform for testing wide variety of sensors in different combinations under variable circumstances. The development covers mechanical design, electrical design – hardware and also control algorithm – software.
|
|
|
Small Temperature Test Chamber
Wolfshörndl, Robert ; Punčochář, Josef (referee) ; Šebesta, Jiří (advisor)
This diploma thesis deals with the design of a small temperature test chamber. The first chapter is a study of temperature sensors suitable for realization of temperature chambers. The conclusion of this chapter is devoted to digital temperature sensor DS18B20. The second chapter deals with the principles and basic parameters of Peltier cells. In the third chapter design of individual electronic components of the temperature chamber is realized (circuit diagrams and PCBs), including a description of basic features of the microcontroller firmware. The fourth chapter is devoted to a description of the basic properties of the application software and a description of the communication protocol. The last two chapters deal with the construction of the temperature chamber and the results of final functional test.
|
|
|
SW for control of climate tests
Fedor, Denis ; Richter, Miloslav (referee) ; Petyovský, Petr (advisor)
This thesis deals with control of a specific climate chamber used for various climate tests. Therefore its elaboration starts with the identification of properties of this climate chamber and basic design of its control. This is followed by measuring the temperature distribution in its internal space in order to verify the usability of this climate chamber. The thesis also does not omit a description of the communication options between climate chamber and application for control of climate tests. The next part of this thesis concerns the design and implementation of the application for control of climate tests itself. On its output is a report of the performed climate test. In the end this thesis contains the description of program testing in the real operation of the company and other possible improvements of the implemented program.
|
|
|
Data collection from sensors - confirmation of the temperature chamber
Platko, Peter ; Čala, Martin (referee) ; Šedivá, Soňa (advisor)
Thesis deals with desing and implementation of automated data collection during confirmation of temperature chamber. First chapter describes the confirmation of temperature chamber. Second chapter consist of overview of temperature sensors and description of hardware used in the thesis. Third chapter describes work with selected LabVIEW libraries and architectures. Whole LabVIEW application is described in chapter four. Chapter Fifth chapter serves as user manual and last chapter consist of evaluation of application and ideas for improvements.
|
|
|
Application of Thermoelectric Module for Temperature Control
Gofroň, Vojtěch ; Andrš, Ondřej (referee) ; Houška, Pavel (advisor)
This bachelor thesis describes the possibilities of use thermoelectric modules for temperature control in a temperature chamber. In the theoretical part are shown physical principles of thermoelectric cooling, heating and power generation. The main part regarding thermoelectric modules describes its design, use and important parameters for temperature control. The next chapter is focused on measuring of quantities important for temperature control using thermoelectric modules. The last part describes few proposals of a temperature chamber design.
|
|
|
Design Thermally Insulated Chamber and Constant Temperature Regulation of Chamber
Vejnar, Pavel ; Dohnal, Petr (referee) ; Šedivá, Soňa (advisor)
The purpose of thesis is proposes a small temperature chamber with temperature control. The first part is focused on description Peltier cells, the theory of heat transfer and cooling. Next part of thesis is select suitable thermo-box and computes temperature resistance and includes simulation and real measuring. In next step is chamber simulate in program ANSYS and compare with real measuring. At the end is construct electronic control of temperature in thermo-box for constant value with programming program for the PC. The conclusion summarizes the results of the work.
|
|
|
Data collection from sensors - confirmation of the temperature chamber
Platko, Peter ; Čala, Martin (referee) ; Šedivá, Soňa (advisor)
Thesis deals with desing and implementation of automated data collection during confirmation of temperature chamber. First chapter describes the confirmation of temperature chamber. Second chapter consist of overview of temperature sensors and description of hardware used in the thesis. Third chapter describes work with selected LabVIEW libraries and architectures. Whole LabVIEW application is described in chapter four. Chapter Fifth chapter serves as user manual and last chapter consist of evaluation of application and ideas for improvements.
|
|
|
SW for control of climate tests
Fedor, Denis ; Richter, Miloslav (referee) ; Petyovský, Petr (advisor)
This thesis deals with control of a specific climate chamber used for various climate tests. Therefore its elaboration starts with the identification of properties of this climate chamber and basic design of its control. This is followed by measuring the temperature distribution in its internal space in order to verify the usability of this climate chamber. The thesis also does not omit a description of the communication options between climate chamber and application for control of climate tests. The next part of this thesis concerns the design and implementation of the application for control of climate tests itself. On its output is a report of the performed climate test. In the end this thesis contains the description of program testing in the real operation of the company and other possible improvements of the implemented program.
|
|
|
Design Thermally Insulated Chamber and Constant Temperature Regulation of Chamber
Vejnar, Pavel ; Dohnal, Petr (referee) ; Šedivá, Soňa (advisor)
The purpose of thesis is proposes a small temperature chamber with temperature control. The first part is focused on description Peltier cells, the theory of heat transfer and cooling. Next part of thesis is select suitable thermo-box and computes temperature resistance and includes simulation and real measuring. In next step is chamber simulate in program ANSYS and compare with real measuring. At the end is construct electronic control of temperature in thermo-box for constant value with programming program for the PC. The conclusion summarizes the results of the work.
|
guest ::
